FAMAE SG 540 Small Parts Kit

This new folding knife comes out from a cooperation and planning phase with G.I.G.N. (special unit of the French national Gendarmerie). To maximize penetration, a special blade tip has been developed. On the back side of the handle it has a special tool to cut plastic handcuffs. It comes with a rear glass breaker, reversible clip and safety lock. The sheath has a hard ABS structure on a cordura basis and it has several possible ways of fixing: MOLLE system for tactical jackets, belt fixing and side fixing. The sheath is planned to be used with open blade knife. Free shipping. Specifications:Weight: 207g Blade Length: 107mm Total Length: 270mm Main Blade Thickness: 3.5mm Blade Material: Bohler Steel N690 (58HRC) Handle Material: Anticorodal Anodized Aluminum Blade Serration: Yes Main Grinding: Flat Blade Finishing: Burnishing MIL-C-13924 Product Code(s): 133GLAUCAB1

June 2006, the “185° Rgt. Ricognizione ed Acquisizione Obiettivi” (Target Acquisition Regiment) airborne “FOLGORE” (185° RAO) commissioned to EXTREMA RATIO the developing of a special knife based on specifications concerning their special duties. The 185° RAO, is the only unit in the Italian Armed Forces in charge of long range recons and to acquire several kind of targets to be engaged with artillery, helicopters, aircraft and battleships suppression fire, across all the possible theatres during armed force, interforce and multinational force operations. A very delicate and dangerous duty, operated by detachments capable to penetrate, operate and survive in hostile surroundings thanks to a two years very hard training. The motto of this special operation regiment is: “VIDERE NEC VIDERI”, from Latin: “SEE WITHOUT BE SEEN”. The result is the knife called RAO, a survival knife, not a big folder but a compact field knife with a strong and heavy blade and a very safe locking system, assisted by an extra safe device that turn the folder in a real fix blade knife. The blade opening and closing are acting with both the hands together to minimize the risk of self injuries. The blade, because of it’s weight, it’s a real guillotine. The extra safe device is a steel pin to be hand screwed through two holes placed by the guard zone of the massive anticorodal aluminum alloy handle. This device is necessary because of the violence of the chopping performances expressed this uncommon folder. The presence of this concrete pin between the blade and the user hands is a great psychological assistance to chop strongly and quickly. The sheath is an essential part of the system.It contain a diamond sharpener and allows the user to carry the knife in open condition, held by a two clip provided lace or in close condition inside the front pocket. The sheath can be hanged to the last generating combat jacket or standard belts thanks to M.O.L.L.E. system. Desert Warfare finish is special order; additional 4-8 weeks lead time. Free shipping. Specifications:Weight: 335g Blade Length: 115mm Total Length: 260mm Main Blade Thickness: 6.3mm Blade Material: Bohler Steel N690 (58HRC) Handle Material: Anticorodal Anodized Aluminum Blade Serration: No Main Grinding: Flat Blade Finishing: Burnishing MIL-C-13924 Product Code(s): 130RAO 130RAODW

The resolza is today one of the most famous traditional knives of our country. Its name has ancient origins and recalls the razor. This model was firstly produced in Sardinia some centuries ago and it has attended the island farmers and shepherds in their daily works. It followed them even when those men were called to war. The chronicles of the Sassari Brigade during World War One quote this knife in each soldier outfit. We want to make a tribute revisiting this knife following our standards. In doing this we do not want to hurt any prestigious Sardinian craftsman who still hands down tradition and wisdom of his ancestors. Dimensions and proportions are the original ones with a 12 cm blade, but the materials and technologies are those of our production. The handle has been revised according to our style while the blade is closer to the original one. Extrema Ratio has improved the original version adding the liner lock. Free shipping. Specifications:Weight: 93g Blade Length: 122mm Total Length: 268mm Main Blade Thickness: 3mm Blade Material: Bohler Steel N690 (58HRC) Handle Material: Anticorodal Anodized Aluminum Blade Serration: No Main Grinding: Flat Blade Finishing: Burnishing MIL-C-13924 Product Code(s): 135RESBL 135RESSW

The common features of the "Basic Folder" series, including the BF1 and BF2, are lightness, simplicity and ease of carry. BF1 and BF2 are utility knives, the BF3 is both a utility and a combat knife. The blade is sharp and piercing, the carry (where legally allowed) is sufficiently comfortable. The “bridge like” clip and a long enough pocket will properly conceal the knife. Slim and essential. Free shipping. Specifications:Weight: 123g Blade Length: 120mm Total Length: 271mm Main Blade Thickness: 3mm Blade Material: Bohler Steel N690 (58HRC) Handle Material: Anticorodal Anodized Aluminum Blade Serration: No Main Grinding: Flat Blade Finishing: Burnishing MIL-C-13924 Product Code(s): 135BF3

This model is the evolution of the Fulcrum Folder (out of production since 2005), the first folding knife produced by Extrema Ratio according to the specifics of an Italian anti-terrorism unit. The requirements were: an extremely robust blade that could be used as a lever; toughness comparable to a fixed blade; an ultra secure blade lock; a knife that could be carried in pistol's magazine pocket. The Fulcrum II is basically identical to its predecessor, the only variations are the addition of a reversible clip, the appearance of a partially lowered surface on the handle which improves the ergonomics and facilitates the use of the opening "pin". A manual security lock which works on the lever mechanism "back lock" thus preventing the blade block being removed accidentally during energetic use. This lock can also be used when the knife is closed to prevent the knife being opened if taken without authorisation. In this case the knife cannot be opened even if the mechanism is often irrevocably damaged. The dorsal blade, with a flat grinding, offers a comfortable resting point for the thumb. The tang, in tempered steel, is efficacious for breaking glass and is provided with a hole for fixing on a security lace. Desert Warfare finish is special order; additional 4-8 weeks lead time. Free shipping. Out Of Stock: - Black Specifications:Weight: 204g Blade Length: 90mm Total Length: 222mm Main Blade Thickness: 6.3mm Blade Material: Bohler Steel N690 (58HRC) Handle Material: Anticorodal Anodized Aluminum Blade Serration: Yes Main Grinding: Flat Blade Finishing: Burnishing MIL-C-13924 Product Code(s): 136FFIID 136FFIIDDW

All details of MF series are also valid for MF2. In MF2 the sub hilt makes the grip extremely stable and avoids slippage of the hand on the blade. The blade guard enables a fast opening when pushing it with the forefinger of the holding hand (semi-assisted opening). The Ordinanza Col Moschin version is only available in black. Desert Warfare finish are special order; additional 4-8 weeks lead time. Free shipping. Specifications:Weight: 194g Blade Length: 107mm Total Length: 265mm Main Blade Thickness: 3.5mm Blade Material: Bohler Steel N690 (58HRC) Handle Material: Anticorodal Anodized Aluminum Blade Serration: No Main Grinding: Flat Blade Finishing: Burnishing MIL-C-13924 Product Code(s): 133MF2 133MF2DW 133MF2COLMOS

MF0 is the “little” version of the MF series and is basically the compact version of MF2. It mantains all the MF2 characteristics with the exception of the handle, which is reduced to the minimum lenght. The blade is shortened making it similar to our Shrapnel “back up” knife. All MF knives are equipped with rear glassbreaker. The circular milling on their handle makes it easier to change the grip position from sauber to reverse grip. The clip is reversable. The double screw enables the opening regulation strength. The main characteristic of the MF0 is the sub hilt which makes the grip extremely stable and avoids slippage of the hand on the blade. The blade guard enables a fast opening when pushing it with the forefinger of the holding hand. (semi-assisted opening). Desert Warfare finish is special order; additional 4-8 weeks lead time. Free shipping. Specifications:Weight: 139g Blade Length: 65mm Total Length: 181mm Main Blade Thickness: 3.5mm Blade Material: Bohler Steel N690 (58HRC) Handle Material: Anticorodal Anodized Aluminum Blade Serration: No Main Grinding: Flat Blade Finishing: Burnishing MIL-C-13924

All MF knives are equipped with rear glassbreaker. The circular milling on their handle makes it easier to change the grip position from sauber to reverse grip. The clip is reversable. The double screw enables the opening regulation strength. Desert Warfare finish is special order; additional 4-8 weeks lead time. Free shipping. Specifications:Weight: 166g Blade Length: 87mm Total Length: 227mm Main Blade Thickness: 3.5mm Blade Material: Bohler Steel N690 (58HRC) Handle Material: Anticorodal Anodized Aluminum Blade Serration: No Main Grinding: Flat Blade Finishing: Burnishing MIL-C-13924 Product Code(s): 133MF1 133MF1DW 133MF1BC 133MF1BCDW

Spare magazine for Type 81. 30 rounds blocked to 5.

10-Pack

A lightweight, compact spotter that provides unrivaled image quality for a device of its size. Designed with strict weight requirements in mind, the Spotter M provides crystal clear 8x42 optics in a fully mil-spec package and weighs in at less than 300 grams. Whether in the outdoors, on the range or in the field, Newcon Optik’s SPOTTER M Tactical Monocular will bring your targets into clear, consistently-sharp, high contrast focus at short, mid and long ranges — especially at the kind of distances that overwhelm lesser optics. The SPOTTER M features a M22 ranging reticle and impressive 8x42 optics. The compact and lightweight SPOTTER M is nitrogen-filled, waterproof and dustproof. Mechanical & Environmental: - Weight: 290g - Dimensions: 142mm x 50mm x 59mm - Operating Temperature Range: -30°C to +60°C - Storage Temperature Range: -30°C to +60°C - Humidity: 90% - Nitrogen purged: Yes - Waterproofing: IP67

The best looking, best priced and best quality 12 GA semi-auto bullpup on the market is back in stock and now with further improvements including: •Oversized 20x27mm rounded charging handle that provides fast and comfortable manipulation of operating mechanism •Magazines now drop free for quick and effortless reloads •Spare Parts Kit now optionally available The HG-105 is a semi-auto gas-piston operated detachable magazine bullpup shotgun. It has a 12 Gauge 3” chamber with a 18.5” barrel. The bullpup configuration allows for a smaller overall length without a compromise in barrel length. This configuration results in a center/rear biased weight distribution, which reduces strain during long periods of use and increases transition speed in CQB and action shooting scenarios. The detachable magazine allows for easy and rapid reloading over conventional tube type systems. Magazine seating is straight insertion style, allowing for smooth and easy reloads. It features a monolithic top picatinny rail, height adjustable check rest, and a bottom picatinny rail. Upper receiver is constructed from aluminum while the lower is polymer. Barrel fitted with interchangeable chokes. Economically priced $200-500 less than comparable alternatives on the Canadian market, with no compromises made in quality or design. Like all of the products imported by Tactical Imports, the HG-105 was thoroughly tested to ensure the utmost in reliability and durability, and is backed with a 2 year warranty. Tracker Arms prides itself with the quality of materials, using 4140 steel for the bolt, bolt carrier, lock, and barrel with 303 steel for the piston and 6082 alloy for the handguard. Some other manufacturers of similar products use inferior 1040 steel and 6013 alloy in an attempt to cut costs, often at the expense of durability, reliability and safety. Comes with manual, one 5 round magazine, angled foregrip and detachable flip-up iron sights. Note: For best results, loads of 3 dram or higher is recommended Features: •Detachable magazine for quick and easy reloading •Compact bullpup design •Monolithic top picatinny rail •Bottom picatinny rail •Height adjustable check rest •Reversible charging handle

The MOD Armory Integrated Components PVS-14 J Arm is a minimalist mounting solution for your PVS-14 monocular. It is a no frills solution with no fancy features, just good construction with quality materials, and simplistic but smooth swivel operation. There is no detent or push button as on a Wilcox arm, this arm is an adjustable friction arm. The arm is able to articulate to both sides, as well as slightly up and out of the way for stowage. Weight: Dovetail: 1.58 oz. Material Construction: Type III anodized, Light Weight, Aerospace Grade Metals, and High Wear Resistant Delrin Accommodates NVG AN/PVS-14 Suite and many other monoculars with J arm port Friction setting allows easy travel (Left or Right Eye) without having to adjust a knob 100% Made in the U.S.A. Note: Due to the mounting surface on this arm, it is not recommended for use with the Nocturn Industries Tanto monocular.

Introducing the all-new Axor Arms Folding Magazine-fed Pump Shotgun (FMP), exclusively from Tactical Imports. The FMP is available with 5 and 10 round box magazines and 20 and 30 round drum magazines. It features a unique folding receiver design that allows the shotgun to be easily reduced in size to just 24” for compact and convenient transportation and storage. The front sight is fiber optic while the rear is u-notch, aiding in fast target acquisition. In front of the rear sight is a top mounted picatinny rail, machined into receiver for ultimate durability. The stock is telescoping, with integrated shell carrier and extra-thick buttpad for shooting comfort. The textured pump handle is spring assisted and ergonomically designed for grip in wet conditions or when wearing gloves. Includes integral front and rear hand-stops. The FMP is of exceptional quality, with excellent fit and finish. It is constructed from top materials, including 7075 billet machined alloy for the receiver, AISI 4140 drilled steel for the barrel, and durable fiber reinforced polymer for the grip and stock components. The development of the FMP shotgun sought to overcome many of the shortfalls of the common and dated shotgun design. The use of a detachable magazine allows for a shorter barrel without the sacrifice of magazine capacity. The shorter length results in a shotgun that is lighter, more compact and faster for competition and action shooting scenarios. The detachable magazine also allows for easy and rapid unloading and reloading over conventional tube type systems. Magazine seating is straight insertion style and drop free, allowing for smooth and simplistic reloads. The top picatinny rail permits the user to tailor their shotgun towards their specific needs/mission requirements with a wide variety of picatinny optics and accessories. The telescoping stock features multiple positions, permitting comfortable use by all. Comes with one 10 round magazine, interchangeable choke tube kit and instruction manual, optics/accessories not included. Non-restricted. Features: •Available with 20 and 30 round drum magazines (20 is pictured above) •Unique Folding Receiver Design for compact transport and Storage •Drop-Free Detachable magazine for quick and easy reloading •Machined Top Picatinny rail •Exceptional quality, fit & finish •Telescoping stock with built-in shell holder

Picatinny Riser, torx screws and wing guard. Part #A1220

Slant Compensator for Type 81 LMG. Small, compact and lightweight option to reduce muzzle flip, specifically manufactured for Type 81 LMG. When firing offhand, the rifle will recoil up and away from support hand, therefore the idea for the slant compensator was born to counteract this diagonal movement. Manufactured in USA, Black Oxide Finish. Be Sure to select correct threading for rifle being fitted to. Factory defect, offered at half price The diameter is reduced so the notches don't reach the locking pins. Loctite may be needed to maintain ideal position This is M14 thread, only fits LMG models s/n 20202001+. Please see other listing for M16 thread for SR and other LMG models