0 Reviews
The Novus PDS-1 is a reproduction of the Russian IP87 prism dot sight. It is a battle proven design featuring an 6061-T6 housing with durable epoxy coating and a circle dot reticle (60+2MOA) for superior target acquisition. The sight is rated to 1000G of shock resistance and is IPX8 waterproof. 5 Daylight and 4 Night Vision settings ensure optimal reticle brightness regardless of the lighting conditions and Anti-Reflective and Anti-Fog lens coatings ensure that regardless of the environment, the sight can still be used. Improvements over the original design include an auto-sleep/auto-awake function and a 8000 hour battery life, all on a standard 1.5V AA battery (not included). Features: •1x prismatic sight designed to reduce target acquisition time and improve accuracy in all lighting conditions •Durable 6061-T6 aluminum construction •2 MOA dot with 60 MOA circle •5x daylight settings and 4x NV (night vision) compatible settings •Auto-sleep mode activates after 10 minutes stationary. The reticle will auto-wake if motion is detected •Low battery alarm flashes 5 times every 3 minutes when battery power is lower than 1.1v •Powered by a single 1.5v AA battery •Mounts to standard 20mm RIS / 1913 Picatinny rails •1/4 MRAD click value adjustments for both windage and elevation •IPX8 waterproof and 1000g shockproof tested
0 Reviews
Multipurpose tactical knife. Very light and easy to handle. This single-edge stiletto with single guard comes with a special Aspis nylon sheath which has been specifically studied by Extrema Ratio to allow the quick release of the blade and it's fastening inside the M.O.L.L.E. system, thanks to two multi-position clips. Available in Black, Desert, HCS, Ranger Green and Wolf Grey colors. Free Shipping. Specifications:Weight: 86g Blade Length: 118mm Total Length: 238mm Main Blade Thickness: 4mm Blade Material: Bohler Steel N690 (58HRC) Main Griding: Flat Handle Material: Forprene Blade Finishing: - Black: Burnishing MIL-C-13924 - HCS: Stone Washed - Wolf Grey: Stone Washed - Desert: Stone Washed - Ranger Green: Stone Washed
0 Reviews
Introducing the all-new Axor Arms Folding Magazine-fed Pump Shotgun (FMP), exclusively from Tactical Imports. The FMP is available with 5 and 10 round box magazines and 20 and 30 round drum magazines. It features a unique folding receiver design that allows the shotgun to be easily reduced in size to just 24” for compact and convenient transportation and storage. The front sight is fiber optic while the rear is u-notch, aiding in fast target acquisition. In front of the rear sight is a top mounted picatinny rail, machined into receiver for ultimate durability. The stock is telescoping, with integrated shell carrier and extra-thick buttpad for shooting comfort. The textured pump handle is spring assisted and ergonomically designed for grip in wet conditions or when wearing gloves. Includes integral front and rear hand-stops. The FMP is of exceptional quality, with excellent fit and finish. It is constructed from top materials, including 7075 billet machined alloy for the receiver, AISI 4140 drilled steel for the barrel, and durable fiber reinforced polymer for the grip and stock components. The development of the FMP shotgun sought to overcome many of the shortfalls of the common and dated shotgun design. The use of a detachable magazine allows for a shorter barrel without the sacrifice of magazine capacity. The shorter length results in a shotgun that is lighter, more compact and faster for competition and action shooting scenarios. The detachable magazine also allows for easy and rapid unloading and reloading over conventional tube type systems. Magazine seating is straight insertion style and drop free, allowing for smooth and simplistic reloads. The top picatinny rail permits the user to tailor their shotgun towards their specific needs/mission requirements with a wide variety of picatinny optics and accessories. The telescoping stock features multiple positions, permitting comfortable use by all. Comes with one 10 round magazine, interchangeable choke tube kit and instruction manual, optics/accessories not included. Non-restricted. Features: • Available with 20 and 30 round drum magazines (20 is pictured above) • Unique Folding Receiver Design for compact transport and Storage • Drop-Free Detachable magazine for quick and easy reloading • Machined Top Picatinny rail • Exceptional quality, fit & finish • Telescoping stock with built-in shell holder
0 Reviews
Introducing the all-new Sulun Arms SC-215 Compact Side by Side, exclusively from Tactical Imports. The SC-215 features a steel receiver for added durability, with increased weight resulting in less felt recoil and better shootability. The hammers are external, allowing for easy modulation of the action with the compact barrel. This 12GA was specifically designed for the Canadian market to feature a robust and compact design in a NON-RESTRICTED package. Weighing in at 5.4lbs and just 25” in overall length, this shotgun is small enough to be carried in a pack or in the optionally available leather belt holster. Barrel is easily removed from action for stowage in bug-out bag or survival kit, with longest portion only 16.5" in length. The compact dimensions also makes the SC-215 a great compliment for smaller statured and beginner shooters when combined with 1.75” mini shells. The stock is long enough to be shouldered and features a double thickness rubber buttpad for shooting comfort. The length of pull has been increased 1.75" over the SS-211 to better assist in shootability, while still maintaining compact dimensions. The barrel is rated for steel shot and is 9.8” in length, including interchangeable chokes and a chamber sized for 3” magnum. Steel shot compatible. The SC-215 features a crisp trigger and a beautiful walnut stock, well endowed with aggressive checkering for a sturdy grip with gloves or in wet conditions. The receiver, trigger guard and hammers are beautifully appointed with colour case hardening finish. Limited supply, expected to sell out quickly. We have partnered with Albertan saddlery company, Ridge Top Tack, to custom design and offer a Canadian made leather belt holster specially for the SC-215. Sub 26" OAL restriction only applies to firearms when this is reached via folding, telescoping or otherwise. Since the SC-213 has a fixed OAL and is not a handgun, it is therefore non-restricted. FRT# 197544-1 Features: •Colour case hardening finish •Solid Steel Receiver •External Hammers •LOP Extended 1.75" •Compact design •Double thickness rubber buttpad •Top quality fit and finish •Aggressive checkering for sturdy grip •Steel shot rated
0 Reviews
Despite the name, not all PVS-14’s are created equal. The Opfor PVS-14 uses a true US MILSPEC PVS-14 housing, which offers superior standards for durability such as vibration, immersion, shock and thermal shock over PVS-14 housing clones often used by competitors. While it is often the performance of the tube that often dominates the conversation, what makes the Opfor PVS-14 MILSPEC stand out is the use of superior glass. The Opfor PVS-14 MILSPEC uses the same US MILSPEC lenses manufactured by Qioptiq Excelitas and Fujinon for Noctis Technologies (Aka Carson) that is in use with US Military PVS-14 devices. In comparison to the glass commonly found in commercial night vision devices, this glass results in less distortion, better resolution and better light transmission. This allows the Opfor PVS-14 MILSPEC to optimize the performance of the night vision tube selected for the best possible performance. Optionally available are lenses from another US Military supplier, Rochester Precision Optics. These RPO 3.0+ lenses while still meeting US Military specification, also offer improved light transmission, higher center resolution, significant weight savings (64g, 20%) and increased device compactness (7mm, 6% reduction) over standard US MILSPEC lenses. The PVS-14 Night Vision Monocular is a rugged, combat-proven lightweight, multi-purpose night vision device. The PVS-14 design was originally commissioned by the United States Military to enable nighttime operations and has since become the gold standard for Western militaries and special forces. The PVS-14 can be used as a handheld device, mounted using head gear, mounted to a helmet or attached to rifle platforms to provide night vision capabilities to daytime sights. It features “flip up off” compatibility to have unit turn-off when flipped up, useful in changing light conditions. It also includes a built-in Infrared (IR) illuminator for usage in areas with little or no ambient light sources. The PVS-14 is available with an array of optional accessories to support virtually any operation. Comes with soft carry pouch, headgear + bayonet J-Arm, tube test reports, rubber eyecup and retainer, sacrificial lens, and demist shield If purchasing the optional helmet, please let us know in the comment section at checkout which colour you would like. The options are: Multicam, Black, Tan, Green & Grey
0 Reviews
LAST CHANCE. • Back in stock, this is the last and final shipment of the Type 81 SR • Production line is shut down and there will never be a DMR version of the T81 ever again, full stop • Now available with picatinny side-mount, manufactured by AK MasterMount USA --------------------------------------------------------------------------------------------------- The Type 81 SR is an short-medium range marksman version of the Type 81 rifle family. The rifle was designed with a number of changes over the standard Type 81 to support its role including: • Heavy profile barrel for increased accuracy • Thumbhole stock for better ergonomics in precision shooting positions (including reversible cheekrest for LH shooting) • Flat bottom extended handguard for more stability when shooting from rested surfaces • 5 Round waffle-pattern magazine for bench and prone shooting capability • Threaded muzzle for attachment of optional accessories • Adjustable trigger stop screw for added precision • Lightened trigger pull weight for added precision Offered in deep blued finish over satin-finish wood stock, with threaded receiver pins ready to accept side-mount optics. Comes with one 5/5 magazine, oil bottle and manual. Flash hider and scope not included. All parts and components are brand new production, not surplus. Non-restricted class, in-stock now, while supplies last. Supplied with spare reinforced Gen 2 stock, lifetime warranty. PO4x24-1-01 comes with Extendable Sunshade (built-in), Rubber Eye Cap, Rubber Eye Piece, Scope Cover, Cleaning Cloth, Manual and Adjustment tool. Refer to specifications tab for scope specifications. The Type 81 is a gas operated, magazine fed, semi-automatic rifle. It uses a short-stroke gas piston, located above the barrel, and a two-position gas regulator. The bolt group (of the rotating bolt type) is borrowed from the Type 63 rifle. Type 81 rifles also retains the Type 63 bolt hold-open device, which catches the bolt in the open position after the last round has been fired from magazine. The fire selector – safety switch is located at the right side of the receiver, just above the pistol grip, and can be easily operated with the right hand thumb. The open sights are marked from 100 to 500 meters, with the front sight being mounted just ahead of the gas block. Developed by the Chinese military as a replacement for their Type 56 rifles (license produced AK-47). Was designed to have a longer service life, higher accuracy, improved durability and better controllability in full automatic firing. The Type 81 is used by multiple military and police forces across the globe. Important Notes: There is a second trigger stop screw included in the delivery kit, the one installed in the firearm is too long. The use of blue loctite is recommended for both the trigger stop screw and the threaded scope mount pins, to retain position during repeated use. During testing some occasional shell casing deflections were noted on sunshade, however the deflections were secondary and no noted impact to POI was observed. Some light casing marks may develop over use on sunshade that are only aesthetic in nature. The accuracy potential of the SR is very ammunition dependent, with best results achieved with Hornady Black 123 GR SST and American Eagle 124 GR FMJ, (av. 5 shot groups at 100 yards@ 1.5-3 MOA). Mixed results observed with other brands. 100 round break-in period was observed, whereby groups began to tighten up further after that point. The scope clamping mechanism may need adjustment to fit adapter plate. Click Here for instructions. Click here for available accessories. Features: •Chrome lined barrel and gas system •Short stroke gas piston •2 position gas regulator •Last round bolt hold open
0 Reviews
The LAM 3G is a multi-laser aiming system equipped with collimated visible and IR lasers designed to reach out to 2,000m. Built-in IR illuminator and IR aiming laser provide covert tactical precision when paired with night vision devices. Features an adjustable IR illuminator for better illumination at longer ranges, dual activation switches and high/low power modes ensures appropriate laser intensity during training exercises. With a quick-release M1913 mount, the LAM 3G is among the lightest aimers in its class and is the right choice for professional operators demanding unrivaled performance and reliability. The unit is constructed of high-strength aluminum and can withstand rigors of tactical life on virtually any weapon platform. Comes with case, pressure switch, battery and manual. In stock and ready to ship. Warning: This is a full power non-eye safe unit. IR lasers can cause eye damage and burn out NVD's, it is important to only use high power mode when extra distance is needed and be weary of errant reflections. Features: •Meets full military specifications •Compact, lightweight •Quick release mount •Windage / Elevation adjustment mechanism •Remote control (membrane type switch) •'Laser On' warning indicator •Three independent laser channels •Variable size of illumination spot •Class 3B laser
0 Reviews
Introducing the Low-Profile M-LOK Handguard for Type 81 LMG and M. Features a slim-line design for superior ergonomics and handling, while also preventing hang-ups in gear and surroundings. The design includes a top picatinny rail with inner channel in order to allow use of iron sights while the rail is installed. M-LOK interfaces are located on the sides, bottom and lower 45 degree angles. Manufactured with hard-coat anodized aluminum, with a premium matte black finish. Fits LMG and M models. Does not fit SA, SE and SR. Includes installation instructions, hex keys and spare set of hardware.
0 Reviews
480mm barrel for BRS-99. Includes barrel shroud. To install, simply depress the barrel collet lever, unscrew the collet and remove the old barrel. Slip on the new barrel, depress the barrel collet lever and screw the collet down. Any changes in barrel length must be reported to the CFC. Spare barrel nut is recommended for quick change so that shroud does not need to be removed to add barrel nut.
0 Reviews
1" Flashlight mount for BRS-99. Horizontal forearm and flashlight not included.
0 Reviews
Newcon Optik’s bestselling line of laser range finder monoculars combines industry-leading laser measurement technology, crystal clear optics and simple to use controls into a compact, sturdy package well suited to conditions in the field. The LRM 1500M is for users requiring basic functionality and high reliability. It features a true measurement range of 1,500m (NATO target) and can recall 10 measurements from device memory. The LRM 1800S features a true measurement range of 1,800m (NATO target) and performs accurate speed measurement. For border patrol, law enforcement and other professionals tasked with perimeter control, the LRM 1800S is an invaluable tool. The LRM 2200SI features a true measurement range of 2,200m (NATO target) and is reliable in practically all weather conditions. The built-in digital magnetic compass and inclinometer enable accurate azimuth and inclination measurements. In combination with an NVS 14 series night vision monocular, each device in the LRM line can operate 24 hours a day. All models measure distance to terrain features and still objects. Results can be displayed either in metric or imperial. A selectable reticle, target quality indicator, scan mode and measurement recall are all standard features. 1800S, 2200SI and 3500CI and up can measure speed of moving objects. The 2200SI and 3500CI feature compass, inclinometer, gating and first/last target capabilities. Each model number corresponds to it's rangefinding capability: 1800S -1800 meters 2200SI -2200 meters 3500CI -3500 meters Comes with manual, carrying case, carrying strap, battery, and microfiber cleaning cloth. Features:•Rubber grip panels for secure grip •Seperate sensors for superior reading capabilities •0.5 second measurement time •Advanced electronics and software provide unmatched reliability in adverse conditions and excellent repeatability on difficult to range targets •Canadian manufacture •Rear ocular can be used in conjuction with Newcon NVS night vision monoculars •Integral rubber cover protects optics when not in use. Attached to the optic so it won't get lost •Target quality indicator •Metric or imperial display •Measures speed •Selectable reticle •Scan mode •Measurement recall
0 Reviews
Hunting Plug Kit for Auslof. Limits Magazine to 2+1 capacity
0 Reviews
N.K.2 is a reduced-size knife that enlarges the family of neck knives by Extrema Ratio. The main differences from the predecessor N.K.1 are the tanto blade and the blood-draining slot. The design of the handle prevents accidental injury while drawing. A groove on the back of the blade accommodates for the user’s index finger or thumb, according to wielding style. Due to its overall construction, the N.K.2 is both capable of offense, through very effective slashing strikes, and useful for minute precision work. The included, rapid-release Kydex sheath comes with a paracord strip for neck carry. Furthermore, it can be attached via MOLLE system to tactical vests or to any of the compatible cordura sheaths from Extrema Ratio. N.K.2 can also be used with the following accessories, to be bought separately upon request: -Belt Clip to fix at the belt -Polymer fixing to wear under the shirt Desert Warfare finish is special order; additional 4-8 weeks lead time. Free shipping. Specifications:Weight: 69g Blade Length: 50mm Total Length: 128mm Main Blade Thickness: 6.3mm Blade Material: Bohler Steel N690 (60HRC) Handle Material: Bohler Steel N690 (60HRC) Main Griding: Flat Blade Finishing: - Black: Burnishing MIL-C-13924 - Stone Washed: Stone Washed - Desert Warfare: Desert Warfare Laser-Finish
0 Reviews
The FAMAE SAF is blowback-operated; firing from a closed bolt. It is based on the Swiss SIG SG 540 rifle which is produced under license by FAMAE. The design is a shortened version of the SIG 540 rifle, but the rifle's rotating bolt has been replaced with a simple blowback bolt. The SAF has a bolt hold-open catch that engages after the final shot. The upper and lower receiver, as well as the trigger guard are steel, pistol grip and handguards are all made from polymer. Fixed polymer stock. The SAF series are in service with police services and militaries within South America. Comes with x1 5/30 metal magazine, sling, cleaning kit. Magazines now metal as standard (not polymer as pictured). Features: •Rotary Diopter iron sights •Mil-spec
0 Reviews
N.K.3 is a reduced-size knife in the family of neck knives by Extrema Ratio. N.K.3 is bigger than both N.K.1 and N.K.2, featuring a tanto blade 70mm long and the blood-draining slot. The design of the handle prevents accidental injury while drawing. A groove on the back of the blade accommodates for the user’s index finger or thumb, according to wielding style. Due to its overall construction, the N.K.3 is both capable of offense, through very effective slashing strikes, and useful for minute precision work. The included rapid- release Kydex sheath comes with a paracord strip for neck carry. Furthermore, it can be attached via MOLLE system to tactical vests or to any of the compatible cordura sheaths from Extrema Ratio. N.K.3 can also be used with the following accessories, to be bought separately upon request: -Belt Clip to fix at the belt -Polymer fixing to wear under the shirt Available versions: Stone Washed, Black & Desert Warfare. Desert Warfare finish is special order; additional 4-8 weeks lead time. Free shipping. Specifications:Weight: 82g Blade Length: 70mm Total Length: 153mm Blade Thickness: 6.3mm Blade Material: Bohler Steel N690 (60HRC) Main Grid: Flat Blade Finishing: - Stone Washed: Stone Washed - Black: MIL-C-13924 Burnishing - Desert Warfare: Desert Warfare Laser-Finish Handle Material: Bohler Steel N690 (60HRC)
0 Reviews
Product Availability : product In stock
Introducing the all-new Sulun Arms SC-215 Compact Side by Side, exclusively from Tactical Imports. The SC-215 features a steel receiver for added durability, with increased weight resulting in less felt recoil and better shootability. The hammers are external, allowing for easy modulation of the action with the compact barrel. This 12GA was specifically designed for the Canadian market to feature a robust and compact design in a NON-RESTRICTED package. Weighing in at 5.4lbs and just 25” in overall length, this shotgun is small enough to be carried in a pack or in the optionally available leather belt holster. Barrel is easily removed from action for stowage in bug-out bag or survival kit, with longest portion only 16.5" in length. The compact dimensions also makes the SC-215 a great compliment for smaller statured and beginner shooters when combined with 1.75” mini shells. The stock is long enough to be shouldered and features a double thickness rubber buttpad for shooting comfort. The length of pull has been increased 1.75" over the SS-211 to better assist in shootability, while still maintaining compact dimensions. The barrel is rated for steel shot and is 9.8” in length, including interchangeable chokes and a chamber sized for 3” magnum. Steel shot compatible. The SC-215 features a crisp trigger and a beautiful walnut stock, well endowed with aggressive checkering for a sturdy grip with gloves or in wet conditions. The receiver, trigger guard and hammers are beautifully appointed with colour case hardening finish. Limited supply, expected to sell out quickly. We have partnered with Albertan saddlery company, Ridge Top Tack, to custom design and offer a Canadian made leather belt holster specially for the SC-215. Sub 26" OAL restriction only applies to firearms when this is reached via folding, telescoping or otherwise. Since the SC-213 has a fixed OAL and is not a handgun, it is therefore non-restricted. FRT# 197544-1 Features: •Colour case hardening finish •Solid Steel Receiver •External Hammers •LOP Extended 1.75" •Compact design •Double thickness rubber buttpad •Top quality fit and finish •Aggressive checkering for sturdy grip •Steel shot rated
0 Reviews
Product Availability : product In stock
Introducing the all-new Axor Arms Folding Magazine-fed Pump Shotgun (FMP), exclusively from Tactical Imports. The FMP is available with 5 and 10 round box magazines and 20 and 30 round drum magazines. It features a unique folding receiver design that allows the shotgun to be easily reduced in size to just 24” for compact and convenient transportation and storage. The front sight is fiber optic while the rear is u-notch, aiding in fast target acquisition. In front of the rear sight is a top mounted picatinny rail, machined into receiver for ultimate durability. The stock is telescoping, with integrated shell carrier and extra-thick buttpad for shooting comfort. The textured pump handle is spring assisted and ergonomically designed for grip in wet conditions or when wearing gloves. Includes integral front and rear hand-stops. The FMP is of exceptional quality, with excellent fit and finish. It is constructed from top materials, including 7075 billet machined alloy for the receiver, AISI 4140 drilled steel for the barrel, and durable fiber reinforced polymer for the grip and stock components. The development of the FMP shotgun sought to overcome many of the shortfalls of the common and dated shotgun design. The use of a detachable magazine allows for a shorter barrel without the sacrifice of magazine capacity. The shorter length results in a shotgun that is lighter, more compact and faster for competition and action shooting scenarios. The detachable magazine also allows for easy and rapid unloading and reloading over conventional tube type systems. Magazine seating is straight insertion style and drop free, allowing for smooth and simplistic reloads. The top picatinny rail permits the user to tailor their shotgun towards their specific needs/mission requirements with a wide variety of picatinny optics and accessories. The telescoping stock features multiple positions, permitting comfortable use by all. Comes with one 10 round magazine, interchangeable choke tube kit and instruction manual, optics/accessories not included. Non-restricted. Features: • Available with 20 and 30 round drum magazines (20 is pictured above) • Unique Folding Receiver Design for compact transport and Storage • Drop-Free Detachable magazine for quick and easy reloading • Machined Top Picatinny rail • Exceptional quality, fit & finish • Telescoping stock with built-in shell holder
0 Reviews
Product Availability : product In stock
Slant Compensator for Type 81 LMG. Small, compact and lightweight option to reduce muzzle flip, specifically manufactured for Type 81 LMG. When firing offhand, the rifle will recoil up and away from support hand, therefore the idea for the slant compensator was born to counteract this diagonal movement. Manufactured in USA, Black Oxide Finish. Be Sure to select correct threading for rifle being fitted to. Factory defect, offered at half price The diameter is reduced so the notches don't reach the locking pins. Loctite may be needed to maintain ideal position This is M14 thread, only fits LMG models s/n 20202001+. Please see other listing for M16 thread for SR and other LMG models
0 Reviews
Product Availability : product In stock
Picatinny Riser, torx screws and wing guard. Part #A1220
0 Reviews
Product Availability : product Out of stock
Spare magazine for Type 81. 30 rounds blocked to 5.
10-Pack
0 Reviews
Product Availability : product Out of stock
The best looking, best priced and best quality 12 GA semi-auto bullpup on the market is back in stock and now with further improvements including: •Oversized 20x27mm rounded charging handle that provides fast and comfortable manipulation of operating mechanism •Magazines now drop free for quick and effortless reloads •Spare Parts Kit now optionally available The HG-105 is a semi-auto gas-piston operated detachable magazine bullpup shotgun. It has a 12 Gauge 3” chamber with a 18.5” barrel. The bullpup configuration allows for a smaller overall length without a compromise in barrel length. This configuration results in a center/rear biased weight distribution, which reduces strain during long periods of use and increases transition speed in CQB and action shooting scenarios. The detachable magazine allows for easy and rapid reloading over conventional tube type systems. Magazine seating is straight insertion style, allowing for smooth and easy reloads. It features a monolithic top picatinny rail, height adjustable check rest, and a bottom picatinny rail. Upper receiver is constructed from aluminum while the lower is polymer. Barrel fitted with interchangeable chokes. Economically priced $200-500 less than comparable alternatives on the Canadian market, with no compromises made in quality or design. Like all of the products imported by Tactical Imports, the HG-105 was thoroughly tested to ensure the utmost in reliability and durability, and is backed with a 2 year warranty. Tracker Arms prides itself with the quality of materials, using 4140 steel for the bolt, bolt carrier, lock, and barrel with 303 steel for the piston and 6082 alloy for the handguard. Some other manufacturers of similar products use inferior 1040 steel and 6013 alloy in an attempt to cut costs, often at the expense of durability, reliability and safety. Comes with manual, one 5 round magazine, angled foregrip and detachable flip-up iron sights. Note: For best results, loads of 3 dram or higher is recommended Features: •Detachable magazine for quick and easy reloading •Compact bullpup design •Monolithic top picatinny rail •Bottom picatinny rail •Height adjustable check rest •Reversible charging handle
0 Reviews
Product Availability : product In stock
Introducing the all-new HG-105 Compact, exclusively from Tactical Imports Corp. The HG-105C is a Compact version of the proven HG-105 12GA bullpup shotgun. The design features a shorter handguard and gas system, allowing for significant reductions in weight and volume from the front end of the shotgun. The HG-105C also features a quick-change barrel system, which allows swapping to an optional 12.6” (320mm) barrel, resulting in a configuration only 23” (585mm) in overall length (restricted). The compact dimensions, versatility and lightweight platform make the HG-105C an ideal choice for a variety of uses, including sport shooting, trails, back-up/bug-out bags, hunting (2 round magazine optional) and more. The HG-105C is a semi-auto gas-piston operated detachable magazine bullpup shotgun. It has a 12 Gauge 3” chamber with a 18.5” barrel. The bullpup configuration allows for a smaller overall length without a compromise in barrel length. This configuration results in a center/rear biased weight distribution, which reduces strain during long periods of use and increases transition speed in CQB and action shooting scenarios. The detachable magazine allows for easy and rapid reloading over conventional tube type systems. Magazine seating is straight insertion style, allowing for smooth and easy reloads. It features a monolithic top picatinny rail, height adjustable check rest, and a bottom picatinny rail. Upper receiver is constructed from aluminum while the lower is polymer. Barrel fitted with interchangeable chokes. Economically priced $400 less than comparable alternatives on the Canadian market, with no compromises made in quality or design. Like all of the products imported by Tactical Imports, the HG-105C was thoroughly tested to ensure the utmost in reliability and durability, and is backed with a 2 year warranty. Tracker Arms prides itself with the quality of materials, using 4140 steel for the bolt, bolt carrier, lock, and barrel with 303 steel for the piston and 6082 alloy for the handguard. Some other manufacturers of similar products use inferior 1040 steel and 6013 alloy in an attempt to cut costs, often at the expense of durability, reliability and safety. Comes with manual, one 5 round magazine, foregrip, choke tube kit and detachable flip-up iron sights. Note: For best results, loads of 3 dram or higher is recommended. RPAL Required for 12.6" barrel purchase. Features: •Detachable magazine for quick and easy reloading •Compact bullpup design •Monolithic top picatinny rail •Bottom picatinny rail •Height adjustable check rest •Reversible charging handle
0 Reviews
Product Availability : product In stock
The MOD Armory Integrated Components PVS-14 J Arm is a minimalist mounting solution for your PVS-14 monocular. It is a no frills solution with no fancy features, just good construction with quality materials, and simplistic but smooth swivel operation. There is no detent or push button as on a Wilcox arm, this arm is an adjustable friction arm. The arm is able to articulate to both sides, as well as slightly up and out of the way for stowage. Weight: Dovetail: 1.58 oz. Material Construction: Type III anodized, Light Weight, Aerospace Grade Metals, and High Wear Resistant Delrin Accommodates NVG AN/PVS-14 Suite and many other monoculars with J arm port Friction setting allows easy travel (Left or Right Eye) without having to adjust a knob 100% Made in the U.S.A. Note: Due to the mounting surface on this arm, it is not recommended for use with the Nocturn Industries Tanto monocular.
There are hundreds upon hundreds of different knife brands out there, but what makes something the best? Here’s 5 reasons why we’re convinced Extrema Ratio ...
To newcomers to Night Vision things can seem quite daunting, with a seemingly endless amount of knowledge required and not all of it readily available. We at Tactical ...
We are happy to announce the revealing of our new website!
When we launched our previous site in 2012 it was very ...
Here we will outline several commonly used coupon codes for our online checkout:
ordercombination -Looking to com ...