Home

DMP is a multipurpose knife characterized by a remarkable versatility of use thanks also to its middle size. The drop point blade with a reinforced tip is particularly useful for the hardest use. The full flat grinding gives excellent cutting characteristics. The sheath is minimalist; most of the fabric has been cut off; it has got a 2nd level retention system, remembering the style of the model it was inspired by. The main shell is injection-molded in shockproof nylon. The secondary retention system is reversible for ambidextrous users. The DMP model is available in Black, Desert, HCS, Ranger Green, Wolf Gray versions. Free Shipping. Out of Stock: - Desert - HCS - Wolf Grey - Black Specifications:Weight: 283g Blade Length: 152mm Total Length: 282mm Main Blade Thickness: 6.3mm Blade Material: Bohler Steel N690 (58HRC) Main Griding: Flat Handle Material: Forprene Blade Finishing: - Black: Burnishing MIL-C-13924 - Desert, HCS, Ranger Green, Wolf Grey: Stone Washed

Slant Compensator for Type 81 LMG & SR. Small, compact and lightweight option to reduce muzzle flip, specifically manufactured for Type 81. When firing offhand, the rifle will recoil up and away from support hand, therefore the idea for the slant compensator was born to counteract this diagonal movement. This compensator features 3 positions; off-hand right hand shooting, bench/bi-pod shooting and off-hand left hand shooting. Manufactured in USA, Black Oxide Finish. M16x1 RH. M16 Thread for T81 SR and LMG, serial numbers <20202001 & all 2021 prefix

+1 Magazine Extension for Bersa BP380CC to raise capacity to x9 and provide added grip length. Made from carbon fiber reinforced nylon. To install, remove the cap head screw from the top, install the extension, then replace the cap head screw turning it clockwise until flush to keep the extension from sliding forward on the mag tube. Use a 3/32 allen wrench to make the adjustments. Installation Video

SG2000 WC Bayonet for HK G36, manufactured by Eickhorn Solingen in Germany. Standard issue for German Bundeswehr. Designed as a multi-purpose knife & bayonet with additional wire cutter. Features: •55Si7 carbon steel blade •30-degree angle of flexibility in either lateral direction without damage or fracture •Half serrated blade for cutting through ropes •Non-reflective and corrosion resistant Kalgard treatment protects blade and cross guard •Fiberglass enforced synthetic handle and sheath •Handle electrical resistance insulation protects to 10.000 volts •Polyamide sheath with strap fits all U.S. MOLLE and IDZ carrying systems of the German Bundeswehr •Diamond blade sharpener Specifications:Overall length: 30.9 cm Blade length: 17.3 cm Blade thickness: 3.6 mm Weight: 320 g Steel: 55Si7 (HRC 51-53)

RPK Style Muzzle Brake for Type 81 LMG. Specifically manufactured for Type 81 LMG to reduce felt recoil.  Manufactured in USA, Black Oxide Finish. Be sure to select correct thread for rifle being fitted to

ERMES is the commemorative knife designed with the Special Operative Helicopter Regiment (R.E.O.S.) which is part of the Italian army aviation. R.E.O.S. is the operational unit of helicopters supporting the special forces composed by specifically trained staff, particularly trained and equipped in order to support military activities in every operational context. The stylized knife guards represent the wings present in the heraldic symbol of the regiment. The steel used is the reliable Bölher N690Co heat treated at 58 HRC. Fiberglass-reinforced polyamide FRN (Fiber Reinforced Nylon) was chosen for the handle. The hybrid sheath in Kydex and fabric has a belt attachment with MOLLE system. It is available in two different versions: “ERMES ORDINANZA” with satin blade and ABS suitcase “ERMES OPERATIVO” with burnished blade Free Shipping. Specifications:Weight: 229g Blade Length: 140mm Total Length: 256mm Main Blade Thickness: 6.3mm Blade Material: Bohler Steel N690 (58HRC) Main Griding: Flat Handle Material: Nylon / Fiber Glass (FRN) Blade Finishing: - Operativo: Burnishing MIL-C-13924 - Ordinanza: Satin

The SR-410 is back and now available in an all-new Mid-Size configuration. In order to increase shootability while still maintaining the compact design the SR-410 is known for, a new version has been introduced offering an increase of stock length 1.25" to a 13.25" standard LOP. The barrel in this version has also been increased to 12.2" for additional range. Standard model has also increased LOP 0.75" to 12.75". Models now also available in satin nickel finish and steel receivers for the first time! NO SALES TO USA. -------------------------------------------------------------------------------------------------- The SR-410 Compact Revolver Shotgun, was specifically designed for the Canadian market to feature a lightweight and compact design in a NON-RESTRICTED package. Weighing in at just 4.5lbs and only 24” in overall length, this shotgun is small enough to be carried in a pack or in the optionally available leather belt holster. While .410 GA may seem a little demure to shooters used to 12GA, it is still potent cartridge, with .410 slugs containing nearly double the muzzle energy over a standard .357 Magnum. The stock is long enough to be shouldered and features a double thickness rubber buttpad for shooting comfort. The light weight and compact dimensions also makes the SR-410 a great compliment for smaller statured and beginner shooters. The barrel is rated for steel shot and is 9.8” in length, threaded for interchangeable chokes with a chamber sized for shells up to 3". Optionally available with picatinny top rail for attachment of optics. The SR-410 features a crisp trigger and a beautiful walnut stock, well endowed with aggressive checkering for a sturdy grip with gloves or in wet conditions. Comes with ear & eye protection, manual and C, F and M chokes(one in barrel). Wedge/block kits not included (manual mis-print). Limited supply, expected to sell out quickly. We have partnered with Albertan saddlery company, Ridge Top Tack, to custom design and offer a Canadian made brown leather belt holster specially for the SR-410. Sub 26" OAL restriction only applies to firearms when this is reached via folding, telescoping or otherwise. Since the SR-410 has a fixed OAL and is not a handgun, it is therefore non-restricted. Revolver not considered semi-auto. FRT# 196732-1 Features: •Lightweight and compact design •Double thickness rubber buttpad •Top quality fit and finish •Aggressive checkering for sturdy grip •Steel shot rated

Sling for T81 SR. Military issue, brand new production.

Introducing the all-new Axor Arms Folding Magazine-fed Pump Shotgun (FMP), exclusively from Tactical Imports. The FMP is available with 5 and 10 round box magazines and 20 and 30 round drum magazines. It features a unique folding receiver design that allows the shotgun to be easily reduced in size to just 24” for compact and convenient transportation and storage. The front sight is fiber optic while the rear is u-notch, aiding in fast target acquisition. In front of the rear sight is a top mounted picatinny rail, machined into receiver for ultimate durability. The stock is telescoping, with integrated shell carrier and extra-thick buttpad for shooting comfort. The textured pump handle is spring assisted and ergonomically designed for grip in wet conditions or when wearing gloves. Includes integral front and rear hand-stops. The FMP is of exceptional quality, with excellent fit and finish. It is constructed from top materials, including 7075 billet machined alloy for the receiver, AISI 4140 drilled steel for the barrel, and durable fiber reinforced polymer for the grip and stock components. The development of the FMP shotgun sought to overcome many of the shortfalls of the common and dated shotgun design. The use of a detachable magazine allows for a shorter barrel without the sacrifice of magazine capacity. The shorter length results in a shotgun that is lighter, more compact and faster for competition and action shooting scenarios. The detachable magazine also allows for easy and rapid unloading and reloading over conventional tube type systems. Magazine seating is straight insertion style and drop free, allowing for smooth and simplistic reloads. The top picatinny rail permits the user to tailor their shotgun towards their specific needs/mission requirements with a wide variety of picatinny optics and accessories. The telescoping stock features multiple positions, permitting comfortable use by all. Comes with one 10 round magazine, interchangeable choke tube kit and instruction manual, optics/accessories not included. Non-restricted. Features: •Available with 20 and 30 round drum magazines (20 is pictured above) •Unique Folding Receiver Design for compact transport and Storage •Drop-Free Detachable magazine for quick and easy reloading •Machined Top Picatinny rail •Exceptional quality, fit & finish •Telescoping stock with built-in shell holder

Spare magazine for Type 81. 30 rounds blocked to 5.

10-Pack

The best looking, best priced and best quality 12 GA semi-auto bullpup on the market is back in stock and now with further improvements including: •Oversized 20x27mm rounded charging handle that provides fast and comfortable manipulation of operating mechanism •Magazines now drop free for quick and effortless reloads •Spare Parts Kit now optionally available The HG-105 is a semi-auto gas-piston operated detachable magazine bullpup shotgun. It has a 12 Gauge 3” chamber with a 18.5” barrel. The bullpup configuration allows for a smaller overall length without a compromise in barrel length. This configuration results in a center/rear biased weight distribution, which reduces strain during long periods of use and increases transition speed in CQB and action shooting scenarios. The detachable magazine allows for easy and rapid reloading over conventional tube type systems. Magazine seating is straight insertion style, allowing for smooth and easy reloads. It features a monolithic top picatinny rail, height adjustable check rest, and a bottom picatinny rail. Upper receiver is constructed from aluminum while the lower is polymer. Barrel fitted with interchangeable chokes. Economically priced $200-500 less than comparable alternatives on the Canadian market, with no compromises made in quality or design. Like all of the products imported by Tactical Imports, the HG-105 was thoroughly tested to ensure the utmost in reliability and durability, and is backed with a 2 year warranty. Tracker Arms prides itself with the quality of materials, using 4140 steel for the bolt, bolt carrier, lock, and barrel with 303 steel for the piston and 6082 alloy for the handguard. Some other manufacturers of similar products use inferior 1040 steel and 6013 alloy in an attempt to cut costs, often at the expense of durability, reliability and safety. Comes with manual, one 5 round magazine, angled foregrip and detachable flip-up iron sights. Note: For best results, loads of 3 dram or higher is recommended Features: •Detachable magazine for quick and easy reloading •Compact bullpup design •Monolithic top picatinny rail •Bottom picatinny rail •Height adjustable check rest •Reversible charging handle

Picatinny Riser, torx screws and wing guard. Part #A1220

A lightweight, compact spotter that provides unrivaled image quality for a device of its size. Designed with strict weight requirements in mind, the Spotter M provides crystal clear 8x42 optics in a fully mil-spec package and weighs in at less than 300 grams. Whether in the outdoors, on the range or in the field, Newcon Optik’s SPOTTER M Tactical Monocular will bring your targets into clear, consistently-sharp, high contrast focus at short, mid and long ranges — especially at the kind of distances that overwhelm lesser optics. The SPOTTER M features a M22 ranging reticle and impressive 8x42 optics. The compact and lightweight SPOTTER M is nitrogen-filled, waterproof and dustproof. Mechanical & Environmental: - Weight: 290g - Dimensions: 142mm x 50mm x 59mm - Operating Temperature Range: -30°C to +60°C - Storage Temperature Range: -30°C to +60°C - Humidity: 90% - Nitrogen purged: Yes - Waterproofing: IP67

Slant Compensator for Type 81 LMG. Small, compact and lightweight option to reduce muzzle flip, specifically manufactured for Type 81 LMG. When firing offhand, the rifle will recoil up and away from support hand, therefore the idea for the slant compensator was born to counteract this diagonal movement. Manufactured in USA, Black Oxide Finish. Be Sure to select correct threading for rifle being fitted to. Factory defect, offered at half price The diameter is reduced so the notches don't reach the locking pins. Loctite may be needed to maintain ideal position This is M14 thread, only fits LMG models s/n 20202001+. Please see other listing for M16 thread for SR and other LMG models

The MOD Armory Integrated Components PVS-14 J Arm is a minimalist mounting solution for your PVS-14 monocular. It is a no frills solution with no fancy features, just good construction with quality materials, and simplistic but smooth swivel operation. There is no detent or push button as on a Wilcox arm, this arm is an adjustable friction arm. The arm is able to articulate to both sides, as well as slightly up and out of the way for stowage. Weight: Dovetail: 1.58 oz. Material Construction: Type III anodized, Light Weight, Aerospace Grade Metals, and High Wear Resistant Delrin Accommodates NVG AN/PVS-14 Suite and many other monoculars with J arm port Friction setting allows easy travel (Left or Right Eye) without having to adjust a knob 100% Made in the U.S.A. Note: Due to the mounting surface on this arm, it is not recommended for use with the Nocturn Industries Tanto monocular.