0 Reviews
Partial Length Picatinny/ACOG rail, 3 1/4 inches long and sits at the front part of the dust cover for a forward bias. It is the perfect length for red dot or holographic sights. It weighs 5.5 ounces/156g. This Gen 2 version has a steel insert at the end of its dovetail channel to provide additional strength. The handle is also upgraded to stronger 7075 aluminum. Now you get the best of both worlds: aluminum construction for weight reduction, but steel for strength where it's needed. The AK Master Mount™ patented optic mounts are unique and purpose built products for serious users. They are built as rugged as the rifle itself. It's low profile with a low axis over bore. It also has a unique quick release "Dual Axis Locking" lever and a “2 in 1” top rail design that can accommodate picatinny or ACOG based optics. Made in the USA. Dual-Axis Locking AK optic mounts secure to an AK receiver’s side rail by one of two main methods. The first method uses a rotating lever that has a contoured portion to rotate and lock into a corresponding cut-out in the side rail. Many of the traditional com-bloc optic mounts utilized this design and are broadly referred to as SVD styled mounts. This method is primarily securing the optic mount in the horizontal axis. The second method utilizes a rotating lever to deform the bottom part of the mount to “crimp” onto the side rail. These mounts are not really quick release despite their labeling as such, and this mount deformation makes it difficult to resize the mount to a different side rail on a different rifle. The more modern approach to this method is to use the rotating lever to manipulate a spring loaded clamping bar to compress against the receiver’s side rail to make it quick release capable. These style mounts are prone to “walking” along the side rail with heavy shooting sessions as they only secure the optic mount in the vertical axis. These two techniques have been combined in a patented design to firmly secure our optic mount to an AK’s side rail in both the vertical and horizontal axis to make it Dual Axis Locking. This secure attachment maintains optics zero even with sustained heavy shooting sessions. The clamping bar is also longer than the other optics mounts on the market to provide additional clamping surface contact, and two springs are used in the clamping bar mechanism for increased clamping bar stability and true quick release capability. Low Axis Over Bore The optic mount's low profile hugs the side of the AK receiver and the dust cover to deliver a low axis over bore placement. This allows simultaneous use of the rifle's iron sights if needed. The 12 sided proprietary locking bolt provides for a greater clamping bar tension range, twice that of most optic mounts on the market. This allows for true fine tuning of the clamping bar’s clamping force, and it also ensures proper fitting on side rails of slightly different dimensions on different rifles. Optics zero is maintained. Built Rugged As the AK Itself The optic mounts are machined from a solid block of 6061-T6 aluminum to achieve superior strength, but yet be weight conscious. Its one piece design keeps things simple, maintains structural integrity, and avoids fastener failures or movement that can occur in two piece optic mounts. Likewise the optic mounts were intentionally overbuilt with heavy duty struts to reliably support its integral 2-in-1Picatinny / ACOG rail and any attached optics. Its robust struts then pleasantly blend into the body of the mount which is also rugged enough to withstand whatever abuses are thrown at it. Despite the mounts ruggedness, the edges been rounded and contoured to make it egronomic, snag free and good looking. No wimpy levers here. The throw lever is also heavy duty and is fully inset into the body of the mount to protect it from any snags and accidental release. Accessory Side Rail Built into the struts supporting the top rail are cut-outs that allow for the use of optional Accessory Side Rails. These offset rails allow for use of additional sighting solutions and accessories. Compatibility The AK Master Mount™ AKM version optic mounts are specifically designed for the standard pattern AK side rail. The MasterMount T81 Side Rail was specifically designed to provide ideal positioning, cheek weld and ergonomics when used with a Type 81 rifle. Not compatible with Underfolder. Greater Optics Versatility. Superior Finish. A unique feature of the optic mount is the proprietary rail on the top. The standard picatinny rail pattern has been combined with the ACOG base pattern into one combined rail section. This “2-in-1” rail design allows for more versatility in optics choice by not having to buy two different optic mounts, or an adapter, to accommodate optics with a picatinny base or an ACOG base. The patented AK Master Mount™ optic mount build is made with 6061-T6 alloy completed with a black hardcoat (type III) anodized finish that not only looks great, but adds additional structural strength and wear resistance.
0 Reviews
Built into the struts supporting the top rail of the MasterMount Optic Mounts are cut-outs that allow for the use of optional Accessory Side Rails. This provides an additional attachment point for an accessory such as a flashlight, aiming laser / IR light source, or a micro dot set at a 45 degree angle. This short picatinny rail section is specifically designed for the AK Master Mount optic mounts and attaches by the proprietary clamping system. The picatinny rail is constructed of 6061 aluminum to be tough, but yet lightweight. It is finished with black type III hardcoat anodizing for added strength. The retaining base plate is heated treated steel with nitride finish. The picatinny rail section measures 2 2/16" inches long x 13/16" wide and weighs 0.5 ounces/14g.
0 Reviews
Small Parts Set for FAMAE SAF/Mini SAF/ SAF-200. Includes: #512 Fixing spring #529 joining receiver pin x2 #104 catch spring for bolt release lever #103 washer for sight screw #514 firing axis spring x2
0 Reviews
Add additional performance to your Alien pistol with these solid brass grips. These grips add an additional 3.38 oz (96g) to the the pistol, reducing muzzle flip and reducing the effects of trigger pull imperfections for greater accuracy and forgiveness. These precision machined grips are machined with an aggressive texture to ensure a secure grip in conditions with wet hands or when using gloves.
0 Reviews
Add additional performance to your Alien pistol with these solid brass grips, manufactured by LOK Grips USA. These grips add an additional 8.74 oz (248g) to the bottom of the pistol, reducing muzzle flip and reducing the effects of trigger pull imperfections for greater accuracy and forgiveness. These precision machined grips are machined with an aggressive texture to ensure a secure grip in conditions with wet hands or when using gloves.
0 Reviews
The Novus PDS-1 is a reproduction of the Russian IP87 prism dot sight. It is a battle proven design featuring an 6061-T6 housing with durable epoxy coating and a circle dot reticle (60+2MOA) for superior target acquisition. The sight is rated to 1000G of shock resistance and is IPX8 waterproof. 5 Daylight and 4 Night Vision settings ensure optimal reticle brightness regardless of the lighting conditions and Anti-Reflective and Anti-Fog lens coatings ensure that regardless of the environment, the sight can still be used. Improvements over the original design include an auto-sleep/auto-awake function and a 8000 hour battery life, all on a standard 1.5V AA battery. Features: •1x prismatic sight designed to reduce target acquisition time and improve accuracy in all lighting conditions •Durable 6061-T6 aluminum construction •2 MOA dot with 60 MOA circle •5x daylight settings and 4x NV (night vision) compatible settings •Auto-sleep mode activates after 10 minutes stationary. The reticle will auto-wake if motion is detected •Low battery alarm flashes 5 times every 3 minutes when battery power is lower than 1.1v •Powered by a single 1.5v AA battery •Mounts to standard 20mm RIS / 1913 Picatinny rails •1/4 MRAD click value adjustments for both windage and elevation •IPX8 waterproof and 1000g shockproof tested
0 Reviews
Right Side Safety Selector conversion. Needed to mount MasterMount Type 81 Side Rail if receiver has LH safety.
0 Reviews
We have partnered with Albertan saddlery company, Ridge Top Tack, to custom design and offer a Canadian made brown leather belt holster specially for the SR-410. Not compatible with Mid-Size models.
0 Reviews
The PVS14 is loaded with unique features and practically surpasses the most popular and leading brands. Equipped with high quality optics and select grade Image Intensifier Tubes, the PVS14 is a Real Performer. PVS14 built in accordance to GSCI proprietary LDH™ Concept (Light Durable Housing), has strong, durable, light weight body and smallest in Industry physical dimensions. While one side of monocular comes with “dove tail” bracket, commonly used in MUM‐14 type systems, another side allows to connect PVS‐14 type “J”‐arm with magnetic switch. Additionally, on the both sides of the monocular body located 1/4‐20 tripod threads which allow to attach various optional accessories. In order to attach monocular to the head gear or helmet mount can be used with “J”‐arm adapter‐interface. Monocular can be used with various “PVS‐7/14” type head gears or helmet mount. Besides unlimited “hand held” applications, PVS14 can be used as “quick attach” weapon mountable NV Monocular. PVS14 accepts various afocal lenses 3X or 5X magnification. Comes with Demist Shield, Sacrificial Window, Daytime Filter, AA Battery Extender, Neck Cord, Soft Pouch, Hard Case. Built to order by manufacturer. Gen 3 tubes will not be available until early 2024 As per industry standard, some spots, dots, chicken wire or other cosmetic imperfections are allowed by tube manufacturers for commercial grade image intensifier tubes (CGT). Milspec grade image intensifier tubes have higher standards for cosmetic imperfections. Manual gain included with Photonis tubes. PVS-3151 (51 degree FOV upgrade) is now available. Note: 51 degree FOV comes at the expense of eye relief. It is not recommended if one uses glasses or plans to shoot/wear eye protection while wearing. See link below for available accessories: GSCI Night Vision Accessories Features: •7 Year Warranty •MIL‐STD‐810E Compliant •Integral IR illuminator •Automatic Brightness Control •Uses commonly available AA or CR123 batteries •50 hour operating time •Small and lightweight •Multiple uses modular design; including head/helmet mount, handheld, etc. •J-Arm Magnetic Switch or Dovetail bracket attachments
0 Reviews
LAST CHANCE. • Back in stock, this is the last and final shipment of the Type 81 SR • Production line is shut down and there will never be a DMR version of the T81 ever again, full stop • Now available with picatinny side-mount, manufactured by AK MasterMount USA --------------------------------------------------------------------------------------------------- The Type 81 SR is an short-medium range marksman version of the Type 81 rifle family. The rifle was designed with a number of changes over the standard Type 81 to support its role including: • Heavy profile barrel for increased accuracy • Thumbhole stock for better ergonomics in precision shooting positions (including reversible cheekrest for LH shooting) • Flat bottom extended handguard for more stability when shooting from rested surfaces • 5 Round waffle-pattern magazine for bench and prone shooting capability • Threaded muzzle for attachment of optional accessories • Adjustable trigger stop screw for added precision • Lightened trigger pull weight for added precision Offered in deep blued finish over satin-finish wood stock, with threaded receiver pins ready to accept side-mount optics. Comes with one 5/5 magazine, oil bottle and manual. Flash hider and scope not included. All parts and components are brand new production, not surplus. Non-restricted class, in-stock now, while supplies last. Supplied with spare reinforced Gen 2 stock, lifetime warranty. PO4x24-1-01 comes with Extendable Sunshade (built-in), Rubber Eye Cap, Rubber Eye Piece, Scope Cover, Cleaning Cloth, Manual and Adjustment tool. Refer to specifications tab for scope specifications. The Type 81 is a gas operated, magazine fed, semi-automatic rifle. It uses a short-stroke gas piston, located above the barrel, and a two-position gas regulator. The bolt group (of the rotating bolt type) is borrowed from the Type 63 rifle. Type 81 rifles also retains the Type 63 bolt hold-open device, which catches the bolt in the open position after the last round has been fired from magazine. The fire selector – safety switch is located at the right side of the receiver, just above the pistol grip, and can be easily operated with the right hand thumb. The open sights are marked from 100 to 500 meters, with the front sight being mounted just ahead of the gas block. Developed by the Chinese military as a replacement for their Type 56 rifles (license produced AK-47). Was designed to have a longer service life, higher accuracy, improved durability and better controllability in full automatic firing. The Type 81 is used by multiple military and police forces across the globe. Important Notes: There is a second trigger stop screw included in the delivery kit, the one installed in the firearm is too long. The use of blue loctite is recommended for both the trigger stop screw and the threaded scope mount pins, to retain position during repeated use. During testing some occasional shell casing deflections were noted on sunshade, however the deflections were secondary and no noted impact to POI was observed. Some light casing marks may develop over use on sunshade that are only aesthetic in nature. The accuracy potential of the SR is very ammunition dependent, with best results achieved with Hornady Black 123 GR SST and American Eagle 124 GR FMJ, (av. 5 shot groups at 100 yards@ 1.5-3 MOA). Mixed results observed with other brands. 100 round break-in period was observed, whereby groups began to tighten up further after that point. The scope clamping mechanism may need adjustment to fit adapter plate. Click Here for instructions. Click here for available accessories. Features: •Chrome lined barrel and gas system •Short stroke gas piston •2 position gas regulator •Last round bolt hold open
0 Reviews
Introducing the Low-Profile M-LOK Handguard for Type 81. Features a slim-line design for superior ergonomics and handling, while also preventing hang-ups in gear and surroundings. The design includes a top picatinny rail with inner channel in order to allow use of iron sights while the rail is installed. M-LOK interfaces are located on the sides, bottom and lower 45 degree angles. Manufactured with hard-coat anodized aluminum, with a premium matte black finish. Fits SA and SE models. Does not fit LMG and SR. Includes installation instructions, hex keys and spare set of hardware. In stock, ready to ship.
0 Reviews
The Extrema Ratio Misericordia, adopted by the 4th Alpine Ranger that helped develop and test the product. It is a tactical fixed blade knife, extremely light and compact, it can be used both as a main knife or as a backup blade. The blade of the new Extrema Ratio Misericordia is milled out of Böhler N690 steel, hardened at 58 HRC, it is 118 mm/4.64” long and 4mm/0,16” thick and plain edged. The blade has a spear point profile with full length fuller that makes the knife even lighter, with a ¾ length false edge. The blade is available with the classic Extrema Ratio MIL-C-13924 black finish. On the rear end the handle flows connecting with a large ring, which allows the use of martial arts techniques and permit a very solid grip to the hand, equipped with a "skull crusher" appendix in hard metal. The knife overall weight is just 87g/3.1oz. Being a knife designed and intended for professional use, high relevance has been assigned to ease of carry, access and extraction in case of need. The knife is secured to the sheath by a fast release safety that can be easily reversed for left hand use. The high impact nylon sheath is versatile: an adjustable double clamp system enables the user to fit it to various types of belts. A cone shaped inlet eases the knife’s sheathing, while pressing on the trigger-like safety lever allows for a fast, instinctive knife extraction. An optional kydex sheath (sold separately) is also available, equipped with two textile (male velcro strip on one side and female velcro on the other) to wear the knife hiddenly between a bulletproof vest and a magazine holder. This sheath also offers the possibility of attachment to an adjustable belt by using a belt clip (sold separately). Extrema Ratio Misericordia Black Warfare is a limited series of only 500 pieces. It features all the characteristics of the famous Misericordia adopted by the 4th Alpine Paratroopers Regiment, which contributed to its development and testing, and choose it for its unique characteristics that make it particularly suited for ambush combat. Free Shipping. Specifications:Weight: 87g Blade Length: 118mm Total Length: 233mm Main Blade Thickness: 4mm Blade Material: Bohler Steel N690 (58HRC) Handle Material: Nylon/Fiberglass Main Griding: Flat Blade Finishing: Burnishing MIL-C-13924
0 Reviews
Introducing the all-new Axor Arms Folding Magazine-fed Pump Shotgun (FMP), exclusively from Tactical Imports. The FMP is available with 5 and 10 round box magazines and 20 and 30 round drum magazines. It features a unique folding receiver design that allows the shotgun to be easily reduced in size to just 24” for compact and convenient transportation and storage. The front sight is fiber optic while the rear is u-notch, aiding in fast target acquisition. In front of the rear sight is a top mounted picatinny rail, machined into receiver for ultimate durability. The stock is telescoping, with integrated shell carrier and extra-thick buttpad for shooting comfort. The textured pump handle is spring assisted and ergonomically designed for grip in wet conditions or when wearing gloves. Includes integral front and rear hand-stops. The FMP is of exceptional quality, with excellent fit and finish. It is constructed from top materials, including 7075 billet machined alloy for the receiver, AISI 4140 drilled steel for the barrel, and durable fiber reinforced polymer for the grip and stock components. The development of the FMP shotgun sought to overcome many of the shortfalls of the common and dated shotgun design. The use of a detachable magazine allows for a shorter barrel without the sacrifice of magazine capacity. The shorter length results in a shotgun that is lighter, more compact and faster for competition and action shooting scenarios. The detachable magazine also allows for easy and rapid unloading and reloading over conventional tube type systems. Magazine seating is straight insertion style and drop free, allowing for smooth and simplistic reloads. The top picatinny rail permits the user to tailor their shotgun towards their specific needs/mission requirements with a wide variety of picatinny optics and accessories. The telescoping stock features multiple positions, permitting comfortable use by all. Comes with one 10 round magazine, interchangeable choke tube kit and instruction manual, optics/accessories not included. Non-restricted. Features: •Available with 20 and 30 round drum magazines (20 is pictured above) •Unique Folding Receiver Design for compact transport and Storage •Drop-Free Detachable magazine for quick and easy reloading •Machined Top Picatinny rail •Exceptional quality, fit & finish •Telescoping stock with built-in shell holder
0 Reviews
Product Availability : product In stock
The MOD Armory Integrated Components PVS-14 J Arm is a minimalist mounting solution for your PVS-14 monocular. It is a no frills solution with no fancy features, just good construction with quality materials, and simplistic but smooth swivel operation. There is no detent or push button as on a Wilcox arm, this arm is an adjustable friction arm. The arm is able to articulate to both sides, as well as slightly up and out of the way for stowage. Weight: Dovetail: 1.58 oz. Material Construction: Type III anodized, Light Weight, Aerospace Grade Metals, and High Wear Resistant Delrin Accommodates NVG AN/PVS-14 Suite and many other monoculars with J arm port Friction setting allows easy travel (Left or Right Eye) without having to adjust a knob 100% Made in the U.S.A. Note: Due to the mounting surface on this arm, it is not recommended for use with the Nocturn Industries Tanto monocular.
0 Reviews
Product Availability : product In stock
A lightweight, compact spotter that provides unrivaled image quality for a device of its size. Designed with strict weight requirements in mind, the Spotter M provides crystal clear 8x42 optics in a fully mil-spec package and weighs in at less than 300 grams. Whether in the outdoors, on the range or in the field, Newcon Optik’s SPOTTER M Tactical Monocular will bring your targets into clear, consistently-sharp, high contrast focus at short, mid and long ranges — especially at the kind of distances that overwhelm lesser optics. The SPOTTER M features a M22 ranging reticle and impressive 8x42 optics. The compact and lightweight SPOTTER M is nitrogen-filled, waterproof and dustproof. Mechanical & Environmental: - Weight: 290g - Dimensions: 142mm x 50mm x 59mm - Operating Temperature Range: -30°C to +60°C - Storage Temperature Range: -30°C to +60°C - Humidity: 90% - Nitrogen purged: Yes - Waterproofing: IP67
0 Reviews
Product Availability : product Out of stock
Spare magazine for Type 81. 30 rounds blocked to 5.
10-Pack
0 Reviews
Product Availability : product In stock
Picatinny Riser, torx screws and wing guard. Part #A1220
0 Reviews
Product Availability : product Out of stock
The best looking, best priced and best quality 12 GA semi-auto bullpup on the market is back in stock and now with further improvements including: •Oversized 20x27mm rounded charging handle that provides fast and comfortable manipulation of operating mechanism •Magazines now drop free for quick and effortless reloads •Spare Parts Kit now optionally available The HG-105 is a semi-auto gas-piston operated detachable magazine bullpup shotgun. It has a 12 Gauge 3” chamber with a 18.5” barrel. The bullpup configuration allows for a smaller overall length without a compromise in barrel length. This configuration results in a center/rear biased weight distribution, which reduces strain during long periods of use and increases transition speed in CQB and action shooting scenarios. The detachable magazine allows for easy and rapid reloading over conventional tube type systems. Magazine seating is straight insertion style, allowing for smooth and easy reloads. It features a monolithic top picatinny rail, height adjustable check rest, and a bottom picatinny rail. Upper receiver is constructed from aluminum while the lower is polymer. Barrel fitted with interchangeable chokes. Economically priced $200-500 less than comparable alternatives on the Canadian market, with no compromises made in quality or design. Like all of the products imported by Tactical Imports, the HG-105 was thoroughly tested to ensure the utmost in reliability and durability, and is backed with a 2 year warranty. Tracker Arms prides itself with the quality of materials, using 4140 steel for the bolt, bolt carrier, lock, and barrel with 303 steel for the piston and 6082 alloy for the handguard. Some other manufacturers of similar products use inferior 1040 steel and 6013 alloy in an attempt to cut costs, often at the expense of durability, reliability and safety. Comes with manual, one 5 round magazine, angled foregrip and detachable flip-up iron sights. Note: For best results, loads of 3 dram or higher is recommended Features: •Detachable magazine for quick and easy reloading •Compact bullpup design •Monolithic top picatinny rail •Bottom picatinny rail •Height adjustable check rest •Reversible charging handle
0 Reviews
Product Availability : product In stock
Slant Compensator for Type 81 LMG. Small, compact and lightweight option to reduce muzzle flip, specifically manufactured for Type 81 LMG. When firing offhand, the rifle will recoil up and away from support hand, therefore the idea for the slant compensator was born to counteract this diagonal movement. Manufactured in USA, Black Oxide Finish. Be Sure to select correct threading for rifle being fitted to. Factory defect, offered at half price The diameter is reduced so the notches don't reach the locking pins. Loctite may be needed to maintain ideal position This is M14 thread, only fits LMG models s/n 20202001+. Please see other listing for M16 thread for SR and other LMG models