0 Reviews
185mm barrel for BRS-99. To install, simply depress the barrel collet lever, unscrew the collet and remove the old barrel. Slip on the new barrel, depress the barrel collet lever and screw the collet down. Any changes in barrel length must be reported to the CFC.
0 Reviews
LAST CHANCE. • Back in stock, this is the last and final shipment of the Type 81 SR • Production line is shut down and there will never be a DMR version of the T81 ever again, full stop • Now available with picatinny side-mount, manufactured by AK MasterMount USA --------------------------------------------------------------------------------------------------- The Type 81 SR is an short-medium range marksman version of the Type 81 rifle family. The rifle was designed with a number of changes over the standard Type 81 to support its role including: • Heavy profile barrel for increased accuracy • Thumbhole stock for better ergonomics in precision shooting positions (including reversible cheekrest for LH shooting) • Flat bottom extended handguard for more stability when shooting from rested surfaces • 5 Round waffle-pattern magazine for bench and prone shooting capability • Threaded muzzle for attachment of optional accessories • Adjustable trigger stop screw for added precision • Lightened trigger pull weight for added precision Offered in deep blued finish over satin-finish wood stock, with threaded receiver pins ready to accept side-mount optics. Comes with one 5/5 magazine, oil bottle and manual. Flash hider and scope not included. All parts and components are brand new production, not surplus. Non-restricted class, in-stock now, while supplies last. Supplied with spare reinforced Gen 2 stock, lifetime warranty. PO4x24-1-01 comes with Extendable Sunshade (built-in), Rubber Eye Cap, Rubber Eye Piece, Scope Cover, Cleaning Cloth, Manual and Adjustment tool. Refer to specifications tab for scope specifications. The Type 81 is a gas operated, magazine fed, semi-automatic rifle. It uses a short-stroke gas piston, located above the barrel, and a two-position gas regulator. The bolt group (of the rotating bolt type) is borrowed from the Type 63 rifle. Type 81 rifles also retains the Type 63 bolt hold-open device, which catches the bolt in the open position after the last round has been fired from magazine. The fire selector – safety switch is located at the right side of the receiver, just above the pistol grip, and can be easily operated with the right hand thumb. The open sights are marked from 100 to 500 meters, with the front sight being mounted just ahead of the gas block. Developed by the Chinese military as a replacement for their Type 56 rifles (license produced AK-47). Was designed to have a longer service life, higher accuracy, improved durability and better controllability in full automatic firing. The Type 81 is used by multiple military and police forces across the globe. Important Notes: There is a second trigger stop screw included in the delivery kit, the one installed in the firearm is too long. The use of blue loctite is recommended for both the trigger stop screw and the threaded scope mount pins, to retain position during repeated use. During testing some occasional shell casing deflections were noted on sunshade, however the deflections were secondary and no noted impact to POI was observed. Some light casing marks may develop over use on sunshade that are only aesthetic in nature. The accuracy potential of the SR is very ammunition dependent, with best results achieved with Hornady Black 123 GR SST and American Eagle 124 GR FMJ, (av. 5 shot groups at 100 yards@ 1.5-3 MOA). Mixed results observed with other brands. 100 round break-in period was observed, whereby groups began to tighten up further after that point. The scope clamping mechanism may need adjustment to fit adapter plate. Click Here for instructions. Click here for available accessories. Features: •Chrome lined barrel and gas system •Short stroke gas piston •2 position gas regulator •Last round bolt hold open
0 Reviews
Waki comes from the well known Japanese Wakizashi swords. Samurais would always bringing it with them, while the katana was used only in case of battles. The Waki blade is produced in Boehler N690 steel and hardened at 58HRC. The handle is in forprene. The knife comes with cordura sheath to safely carry the sharpened blade and to protect it from accidentally bumping which could reduce its efficiency. It can be attached to tactical vests or common belts, being MOLLE system-compliant. Free shipping. Specifications:Weight: 384g Blade Length: 297mm Total Length: 456mm Main Blade Thickness: 4mm Blade Material: Bohler Steel N690 (54HRC) Handle Material: Forprene Main Grinding: Flat Blade Finishing: Burnishing MIL-C-13924
0 Reviews
This knife extends our neck knife series. It comes with N690 steel tanto blade, blood-graining slot on the blade and ring in the back part of the handle. Thanks to its kydex sheath it can be carried at the neck or, in case it is assembled with other special accessories (to be bought separately), it can be fixed to the belt or to the Extrema Ratio cordura M.O.L.L.E system sheath. Available but not included: - BELT-CLIP (for attaching sheath to a belt) - Polymer UNDER SHIRT SYSTEM (for concealed carry) Available versions: Stone Washed, Black & Desert Warfare. Desert Warfare finish is special order; additional 4-8 weeks lead time. Free shipping. Specifications:Weight: 95g Blade Length: 70mm Total Length: 172mm Blade Thickness: 6.3mm Blade Material: Bohler Steel N690 (60HRC) Main Grid: Flat Blade Finishing: - Stone Washed: Stone Washed - Black: MIL-C-13924 Burnishing - Desert Warfare: Desert Warfare Laser-Finish Handle Material: Bohler Steel N690 (60HRC)
0 Reviews
OEM with ONTOS survival knife. Survival kit includes: - Water Container - Water Purification Tablets - Nylon Cord - Button Compass - Candle - Flint & Fire Striker - Fishing Kit - Multi-Tool - Matches - Sewing Kit - Single Edge Razor - Signal Mirror - Whistle - Snare Wire - Wire Saw - Pencil - An English Language Survival Handbook
0 Reviews
Extrema Ratio developed the first knife of a new production line, called CONTACT. It has a blade with a lance-shaped profile, a flat grinding and a diamond-shaped geometry. It has got a lower guard branch to protect the hand from accidental cuts, upper jumping to improve grip, a concave fuller along the entire length of the blade and a generous thickness blade (6.30mm) All these details make the Contact the elder brother of the now famous Requiem, revisited in proportions and in some technical features. The first of a new line of multipurpose knives. The blade is made in Böhler N690 steel with a hardness of 58 HRC and a chemical burnishing coating for the Black version. All other colours in production have got a blade with Stone Washed finishing. The handle is still in forprene . It is no more assembled by the side screws but thanks to the shank in truncated cone-shaped stainless steel that is screwed to the bottom and goes to fit inside a special seat, which makes it solid. In this way the knife is well balanced. The sheath is minimalist; most of the fabric has been cut off; it has got a 2nd level retention system, remembering the style of the model it was inspired by. The main shell is injection-molded in shockproof nylon. The secondary retention system is reversible for ambidextrous users. The blade is guided into the sheath thanks to its cone shape that lends itself well to the rapid insertion and extraction of the blade. To extract the blade, a pressure on the trigger will be sufficient, thus releasing the safety that holds it securely in the sheath. In the horizontal slits of the sheath a system is added, which fixes the blade to avoid shaking noises when it is stored inside. The back side of the nylon sheath is M.O.L.L.E. compatible. The textile part is reduced to its minimum and has got the classic two-button safety strap with a belt loop and a thigh band with rubber reinforcement for anti-rotation. Extrema Ratio aims at this new line by minimizing thickness and size of the knife, but not saving on structural strength and safety accessories. Free shipping. Specifications:Weight: 300g Blade Length: 162mm Total Length: 293mm Main Blade Thickness: 6.3mm Blade Material: Bohler Steel N690 (58HRC) Handle Material: Forprene Main Grinding: Flat Blade Finishing: Burnishing MIL-C-13924 or Stone Washed
0 Reviews
Extrema Ratio is proud to present the new development of karambit folding knife with rescue characteristics. It has been adopted by the special units of U.S.I.V.P. Principality of Monaco Police. Its name comes from the development and consultancy department of Monaco special intervention units. It comes with a standard industrial-grade cutter blade which is easily replaced, a reversible pocket clip, a glass breaker placed in the finger ring. It is produced both in black and stone washed version. Free shipping. Specifications:Weight: 166g Blade Length: 73.5mm Total Length: 196mm Main Blade Thickness: 3mm Blade Material: Bohler Steel N690 (58HRC) Handle Material: Anticorodal Anodized Aluminum Blade Serration: 20mm Main Grinding: Flat Blade Finishing: - Black: Burnishing MIL-C-13924 - Stone Washed: Stone Washed
0 Reviews
Introducing the Low-Profile M-LOK Handguard for Type 81. Features a slim-line design for superior ergonomics and handling, while also preventing hang-ups in gear and surroundings. The design includes a top picatinny rail with inner channel in order to allow use of iron sights while the rail is installed. M-LOK interfaces are located on the sides, bottom and lower 45 degree angles. Manufactured with hard-coat anodized aluminum, with a premium matte black finish. Fits SA and SE models. Does not fit LMG and SR. Includes installation instructions, hex keys and spare set of hardware. In stock, ready to ship.
0 Reviews
The Extrema Ratio Misericordia, adopted by the 4th Alpine Ranger that helped develop and test the product. It is a tactical fixed blade knife, extremely light and compact, it can be used both as a main knife or as a backup blade. The blade of the new Extrema Ratio Misericordia is milled out of Böhler N690 steel, hardened at 58 HRC, it is 118 mm/4.64” long and 4mm/0,16” thick and plain edged. The blade has a spear point profile with full length fuller that makes the knife even lighter, with a ¾ length false edge. The blade is available with the classic Extrema Ratio MIL-C-13924 black finish. On the rear end the handle flows connecting with a large ring, which allows the use of martial arts techniques and permit a very solid grip to the hand, equipped with a "skull crusher" appendix in hard metal. The knife overall weight is just 87g/3.1oz. Being a knife designed and intended for professional use, high relevance has been assigned to ease of carry, access and extraction in case of need. The knife is secured to the sheath by a fast release safety that can be easily reversed for left hand use. The high impact nylon sheath is versatile: an adjustable double clamp system enables the user to fit it to various types of belts. A cone shaped inlet eases the knife’s sheathing, while pressing on the trigger-like safety lever allows for a fast, instinctive knife extraction. An optional kydex sheath (sold separately) is also available, equipped with two textile (male velcro strip on one side and female velcro on the other) to wear the knife hiddenly between a bulletproof vest and a magazine holder. This sheath also offers the possibility of attachment to an adjustable belt by using a belt clip (sold separately). Extrema Ratio Misericordia Black Warfare is a limited series of only 500 pieces. It features all the characteristics of the famous Misericordia adopted by the 4th Alpine Paratroopers Regiment, which contributed to its development and testing, and choose it for its unique characteristics that make it particularly suited for ambush combat. Free Shipping. Specifications:Weight: 87g Blade Length: 118mm Total Length: 233mm Main Blade Thickness: 4mm Blade Material: Bohler Steel N690 (58HRC) Handle Material: Nylon/Fiberglass Main Griding: Flat Blade Finishing: Burnishing MIL-C-13924
0 Reviews
LAST CHANCE. • Back in stock, this is the last and final shipment of the Type 81 SR • Production line is shut down and there will never be a DMR version of the T81 ever again, full stop • Now available with picatinny side-mount, manufactured by AK MasterMount USA --------------------------------------------------------------------------------------------------- The Type 81 SR is an short-medium range marksman version of the Type 81 rifle family. The rifle was designed with a number of changes over the standard Type 81 to support its role including: • Heavy profile barrel for increased accuracy • Thumbhole stock for better ergonomics in precision shooting positions (including reversible cheekrest for LH shooting) • Flat bottom extended handguard for more stability when shooting from rested surfaces • 5 Round waffle-pattern magazine for bench and prone shooting capability • Threaded muzzle for attachment of optional accessories • Adjustable trigger stop screw for added precision • Lightened trigger pull weight for added precision Offered in deep blued finish over satin-finish wood stock, with threaded receiver pins ready to accept side-mount optics. Comes with one 5/5 magazine, oil bottle and manual. Flash hider and scope not included. All parts and components are brand new production, not surplus. Non-restricted class, in-stock now, while supplies last. Supplied with spare reinforced Gen 2 stock, lifetime warranty. PO4x24-1-01 comes with Extendable Sunshade (built-in), Rubber Eye Cap, Rubber Eye Piece, Scope Cover, Cleaning Cloth, Manual and Adjustment tool. Refer to specifications tab for scope specifications. The Type 81 is a gas operated, magazine fed, semi-automatic rifle. It uses a short-stroke gas piston, located above the barrel, and a two-position gas regulator. The bolt group (of the rotating bolt type) is borrowed from the Type 63 rifle. Type 81 rifles also retains the Type 63 bolt hold-open device, which catches the bolt in the open position after the last round has been fired from magazine. The fire selector – safety switch is located at the right side of the receiver, just above the pistol grip, and can be easily operated with the right hand thumb. The open sights are marked from 100 to 500 meters, with the front sight being mounted just ahead of the gas block. Developed by the Chinese military as a replacement for their Type 56 rifles (license produced AK-47). Was designed to have a longer service life, higher accuracy, improved durability and better controllability in full automatic firing. The Type 81 is used by multiple military and police forces across the globe. Important Notes: There is a second trigger stop screw included in the delivery kit, the one installed in the firearm is too long. The use of blue loctite is recommended for both the trigger stop screw and the threaded scope mount pins, to retain position during repeated use. During testing some occasional shell casing deflections were noted on sunshade, however the deflections were secondary and no noted impact to POI was observed. Some light casing marks may develop over use on sunshade that are only aesthetic in nature. The accuracy potential of the SR is very ammunition dependent, with best results achieved with Hornady Black 123 GR SST and American Eagle 124 GR FMJ, (av. 5 shot groups at 100 yards@ 1.5-3 MOA). Mixed results observed with other brands. 100 round break-in period was observed, whereby groups began to tighten up further after that point. The scope clamping mechanism may need adjustment to fit adapter plate. Click Here for instructions. Click here for available accessories. Features: •Chrome lined barrel and gas system •Short stroke gas piston •2 position gas regulator •Last round bolt hold open
0 Reviews
The PVS14 is loaded with unique features and practically surpasses the most popular and leading brands. Equipped with high quality optics and select grade Image Intensifier Tubes, the PVS14 is a Real Performer. PVS14 built in accordance to GSCI proprietary LDH™ Concept (Light Durable Housing), has strong, durable, light weight body and smallest in Industry physical dimensions. While one side of monocular comes with “dove tail” bracket, commonly used in MUM‐14 type systems, another side allows to connect PVS‐14 type “J”‐arm with magnetic switch. Additionally, on the both sides of the monocular body located 1/4‐20 tripod threads which allow to attach various optional accessories. In order to attach monocular to the head gear or helmet mount can be used with “J”‐arm adapter‐interface. Monocular can be used with various “PVS‐7/14” type head gears or helmet mount. Besides unlimited “hand held” applications, PVS14 can be used as “quick attach” weapon mountable NV Monocular. PVS14 accepts various afocal lenses 3X or 5X magnification. Comes with Demist Shield, Sacrificial Window, Daytime Filter, AA Battery Extender, Neck Cord, Soft Pouch, Hard Case. Built to order by manufacturer. Gen 3 tubes will not be available until early 2024 As per industry standard, some spots, dots, chicken wire or other cosmetic imperfections are allowed by tube manufacturers for commercial grade image intensifier tubes (CGT). Milspec grade image intensifier tubes have higher standards for cosmetic imperfections. Manual gain included with Photonis tubes. PVS-3151 (51 degree FOV upgrade) is now available. Note: 51 degree FOV comes at the expense of eye relief. It is not recommended if one uses glasses or plans to shoot/wear eye protection while wearing. See link below for available accessories: GSCI Night Vision Accessories Features: •7 Year Warranty •MIL‐STD‐810E Compliant •Integral IR illuminator •Automatic Brightness Control •Uses commonly available AA or CR123 batteries •50 hour operating time •Small and lightweight •Multiple uses modular design; including head/helmet mount, handheld, etc. •J-Arm Magnetic Switch or Dovetail bracket attachments
0 Reviews
Introducing the all-new Axor Arms Folding Magazine-fed Pump Shotgun (FMP), exclusively from Tactical Imports. The FMP is available with 5 and 10 round box magazines and 20 and 30 round drum magazines. It features a unique folding receiver design that allows the shotgun to be easily reduced in size to just 24” for compact and convenient transportation and storage. The front sight is fiber optic while the rear is u-notch, aiding in fast target acquisition. In front of the rear sight is a top mounted picatinny rail, machined into receiver for ultimate durability. The stock is telescoping, with integrated shell carrier and extra-thick buttpad for shooting comfort. The textured pump handle is spring assisted and ergonomically designed for grip in wet conditions or when wearing gloves. Includes integral front and rear hand-stops. The FMP is of exceptional quality, with excellent fit and finish. It is constructed from top materials, including 7075 billet machined alloy for the receiver, AISI 4140 drilled steel for the barrel, and durable fiber reinforced polymer for the grip and stock components. The development of the FMP shotgun sought to overcome many of the shortfalls of the common and dated shotgun design. The use of a detachable magazine allows for a shorter barrel without the sacrifice of magazine capacity. The shorter length results in a shotgun that is lighter, more compact and faster for competition and action shooting scenarios. The detachable magazine also allows for easy and rapid unloading and reloading over conventional tube type systems. Magazine seating is straight insertion style and drop free, allowing for smooth and simplistic reloads. The top picatinny rail permits the user to tailor their shotgun towards their specific needs/mission requirements with a wide variety of picatinny optics and accessories. The telescoping stock features multiple positions, permitting comfortable use by all. Comes with one 10 round magazine, interchangeable choke tube kit and instruction manual, optics/accessories not included. Non-restricted. Features: •Available with 20 and 30 round drum magazines (20 is pictured above) •Unique Folding Receiver Design for compact transport and Storage •Drop-Free Detachable magazine for quick and easy reloading •Machined Top Picatinny rail •Exceptional quality, fit & finish •Telescoping stock with built-in shell holder
0 Reviews
Product Availability : product Out of stock
Spare magazine for Type 81. 30 rounds blocked to 5.
10-Pack
0 Reviews
Product Availability : product Out of stock
The best looking, best priced and best quality 12 GA semi-auto bullpup on the market is back in stock and now with further improvements including: •Oversized 20x27mm rounded charging handle that provides fast and comfortable manipulation of operating mechanism •Magazines now drop free for quick and effortless reloads •Spare Parts Kit now optionally available The HG-105 is a semi-auto gas-piston operated detachable magazine bullpup shotgun. It has a 12 Gauge 3” chamber with a 18.5” barrel. The bullpup configuration allows for a smaller overall length without a compromise in barrel length. This configuration results in a center/rear biased weight distribution, which reduces strain during long periods of use and increases transition speed in CQB and action shooting scenarios. The detachable magazine allows for easy and rapid reloading over conventional tube type systems. Magazine seating is straight insertion style, allowing for smooth and easy reloads. It features a monolithic top picatinny rail, height adjustable check rest, and a bottom picatinny rail. Upper receiver is constructed from aluminum while the lower is polymer. Barrel fitted with interchangeable chokes. Economically priced $200-500 less than comparable alternatives on the Canadian market, with no compromises made in quality or design. Like all of the products imported by Tactical Imports, the HG-105 was thoroughly tested to ensure the utmost in reliability and durability, and is backed with a 2 year warranty. Tracker Arms prides itself with the quality of materials, using 4140 steel for the bolt, bolt carrier, lock, and barrel with 303 steel for the piston and 6082 alloy for the handguard. Some other manufacturers of similar products use inferior 1040 steel and 6013 alloy in an attempt to cut costs, often at the expense of durability, reliability and safety. Comes with manual, one 5 round magazine, angled foregrip and detachable flip-up iron sights. Note: For best results, loads of 3 dram or higher is recommended Features: •Detachable magazine for quick and easy reloading •Compact bullpup design •Monolithic top picatinny rail •Bottom picatinny rail •Height adjustable check rest •Reversible charging handle
0 Reviews
Product Availability : product In stock
A lightweight, compact spotter that provides unrivaled image quality for a device of its size. Designed with strict weight requirements in mind, the Spotter M provides crystal clear 8x42 optics in a fully mil-spec package and weighs in at less than 300 grams. Whether in the outdoors, on the range or in the field, Newcon Optik’s SPOTTER M Tactical Monocular will bring your targets into clear, consistently-sharp, high contrast focus at short, mid and long ranges — especially at the kind of distances that overwhelm lesser optics. The SPOTTER M features a M22 ranging reticle and impressive 8x42 optics. The compact and lightweight SPOTTER M is nitrogen-filled, waterproof and dustproof. Mechanical & Environmental: - Weight: 290g - Dimensions: 142mm x 50mm x 59mm - Operating Temperature Range: -30°C to +60°C - Storage Temperature Range: -30°C to +60°C - Humidity: 90% - Nitrogen purged: Yes - Waterproofing: IP67
0 Reviews
Product Availability : product In stock
Slant Compensator for Type 81 LMG. Small, compact and lightweight option to reduce muzzle flip, specifically manufactured for Type 81 LMG. When firing offhand, the rifle will recoil up and away from support hand, therefore the idea for the slant compensator was born to counteract this diagonal movement. Manufactured in USA, Black Oxide Finish. Be Sure to select correct threading for rifle being fitted to. Factory defect, offered at half price The diameter is reduced so the notches don't reach the locking pins. Loctite may be needed to maintain ideal position This is M14 thread, only fits LMG models s/n 20202001+. Please see other listing for M16 thread for SR and other LMG models
0 Reviews
Product Availability : product In stock
The MOD Armory Integrated Components PVS-14 J Arm is a minimalist mounting solution for your PVS-14 monocular. It is a no frills solution with no fancy features, just good construction with quality materials, and simplistic but smooth swivel operation. There is no detent or push button as on a Wilcox arm, this arm is an adjustable friction arm. The arm is able to articulate to both sides, as well as slightly up and out of the way for stowage. Weight: Dovetail: 1.58 oz. Material Construction: Type III anodized, Light Weight, Aerospace Grade Metals, and High Wear Resistant Delrin Accommodates NVG AN/PVS-14 Suite and many other monoculars with J arm port Friction setting allows easy travel (Left or Right Eye) without having to adjust a knob 100% Made in the U.S.A. Note: Due to the mounting surface on this arm, it is not recommended for use with the Nocturn Industries Tanto monocular.
0 Reviews
Product Availability : product In stock
Picatinny Riser, torx screws and wing guard. Part #A1220